HENDERSON, Nev.–(BUSINESS WIRE)–Aldec, Inc., a pioneer in mixed HDL language simulation and hardware-assisted verification for ASIC and FPGA designs, is expanding the FPGA Mezzanine Card (FMC) product line to support various applications in the areas of IIoT, Networking, Embedded Vision and Automotive.
The FMC standard from ANSI/VITA has been a key enabler for extending I/O support for a wide range of applications. “We now provide the most comprehensive portfolio of FMC daughter cards that can be used for FPGA development, ASIC emulation and prototyping,” said Zibi Zalewski, Hardware Division General Manager. “Our FMC connectors are based on High Pin Count (HPC) type that is compliant with ANSI/VITA 57.1, and provides individual signaling speed of up to 25 Gb/s per link and overall bandwidth of 200 Gb/s between the daughter card and carrier card for selected configurations.”
The following FMC daughter cards are now available for shipment. Contact Aldec’s global distribution channels for availability and pricing.
FMC-NVMe – 4x NVMe Interfaces (4x PCIe x4 GEN3), PCIe x8 GEN3 Interface on FMC Connector, 64 kb EEPROM for FMC standard I2C Bus, 128 kb EEPROM for PCIe Switch, 128Mb Quad SPI Flash for PCIe Switch, Board Stacking available up to eight FMC-NVMe Boards
FMC-PCIe – PCIe Interface x4 or x8 (connector x16), PCIe Interface x4 (connector x16), 64 kb EEPROM for FMC standard I2C Bus
FMC-ADAS – 5x HSD camera connectors, 5x FPD-Link III deserializer, URM37 V4 module support with RS-232 transceiver (MAX3218) and 12-bit ADC (AD7998) for analog signal, LIDAR-Lite V2 module interface with 5V voltage level shifters
FMC-INTF – PCIe x8 endpoint, QSFP+ 4 lanes, Gigabit Ethernet, USB 2.0, UART/USB bridge, 4 Gb NAND Flash, 2x 32 Mb SPI Flash, Micro SD card socket
FMC-IOT – Wi-Fi IEEE 802.11a, 802.11b, 802.11g and 802.11n, Bluetooth, Zigbee, Gigabit Ethernet, 3 in one Mini PCI Express / USB 2.0 / Micro-SIM Card Socket, SATA host interface, Micro SD card socket
FMC-VISION – HDMI In/Out 1.4, DisplayPort In/Out, MIPI DSI and CSI, Audio codec, 2x USB 3.0 Connectors, connected to FMC via PCIe to USB3.0 Switch
FMC-NET – 4x Ethernet PHY 10/100/1000, WiFi dual band & Bluetooth WiLink-8, 1x QSFP+ 4 lanes up to 40Gb/s, 4x SATA device ports
FMC-QSFP – 2x 100Gb Ethernet – QSFP28, 1x 10Gb Ethernet – SFP+
FMC-INDUSTRIAL – Isolated, full-duplex RS485/422/Profibus up to 20 Mbps, Isolated, half-duplex RS485/422/Profibus up to 40 Mbp, Isolated dual RS232 up to 1 Mbps, Isolated CAN up to 4 Mbps, Isolated dual channel Gate Driver, USB 3.0 Transceiver
Established in 1984, Aldec is an industry leader in Electronic Design Verification and offers a patented technology suite including: RTL Design, RTL Simulators, Hardware-Assisted Verification, SoC and ASIC Prototyping, Design Rule Checking, CDC Verification, IP Cores, High-Performance Computing Platforms, Embedded Development Systems, Requirements Lifecycle Management, DO-254 Functional Verification and Military/Aerospace solutions. www.aldec.com
T: +44 (0)1522 789 000